Need help?Do you have a question about the UbiBot WS1 Pro and is the answer not in the manual?
General| Humidity Range | 0 to 100% RH |
|---|---|
| Humidity Accuracy | ±3% RH |
| Alerts | Email, SMS, App notifications |
| Measurement Parameters | Temperature, Humidity, Light |
| Temperature Accuracy | ±0.3°C |
| Connectivity | Wi-Fi, Ethernet |
| Power Supply | DC 5V |
| Light Range | 0 to 100, 000 Lux |
| Operating Conditions | 0 to 100% RH |
| Data Storage | Cloud storage |
| Temperature Range | -20°C to 60°C |
Explains the 'System Protection' error code and how to resolve it through device configuration.
Details the 'WiFi Connection Failed' error code and refers to troubleshooting steps.
Addresses the 'Failed to Connect to Server' error and directs users to FAQs for resolution.
Explains the 'Device Activation Failed' error and points to troubleshooting section 1.
Describes the 'Data Save Failure' error, often caused by power disruptions during saving.
Explains the 'Incorrect Data Format' error, typically occurring during power disruptions while saving.
Details the 'Data Sync Failed' error and refers users to troubleshooting section 2.
Addresses the 'No SIM Card Found' error and advises checking SIM card insertion.
To Next Page