Need help?Do you have a question about the Ubiquiti airFiber AF-24 and is the answer not in the manual?
General| Frequency Range | 24.05 - 24.25 GHz |
|---|---|
| Max Throughput/Data Rate | 1.4+ Gbps |
| Ingress Protection Rating | IP67 |
| Weight | 2.5 kg |
| Channel Width | 10/20/40 MHz |
| Power Supply/Method | PoE (Power over Ethernet) |
| Operating Temperature | -40 to 70 °C |
| Interface | Gigabit Ethernet |
| Mounting | Pole Mount |
Lists all items included in the airFiber AF-24 package for setup.
Details the side view of the airFiber AF-24, showing adjustment points for mounting.
Details the back view of the airFiber AF-24, showing ports and adjustment points.
Explains the purpose and states of various LEDs on the device for status monitoring.
Outlines the initial steps for setting up the airFiber radios before mounting.
Detailed steps for connecting the airFiber AF-24 to power using the PoE adapter.
Steps to access the airFiber AF-24 configuration interface via web browser for setup.
Configure wireless mode, link name, duplex, frequencies, and output power.
Configure wireless security (AES) and network IP settings for the devices.
Instructions for attaching the pole mount bracket to a pole for mounting the device.
Details on loosening lock bolts and setting the gap for the alignment bracket.
How to align and tighten screws to secure the device to the bracket.
Instructions for attaching a ground wire for safety and warranty compliance.
Steps for connecting the Ethernet cable to the device and PoE adapter.
Diagram of a finished installation showing recommended surge protectors and grounding.
Steps to align the Master and Slave units for an initial wireless link.
How to aim the Master and Slave units to achieve the strongest received signal.
Process for fine-tuning the link for optimal signal strength and maximum data rate.
Detailed technical specifications of the airFiber AF-24, including dimensions and performance.
Important safety warnings and precautions for using the product.
Guidelines for safe electrical connection and operation to prevent hazards.
Conditions that void the warranty and the process for product returns.
Legal disclaimers regarding product warranties and limitation of liability.
FCC compliance statements and operating conditions for the device.
Industry Canada compliance statements and operating conditions for the device.
Warning regarding RF exposure and antenna placement requirements.
Information about CE marking and alert signs indicating product compliance.
To Next Page