Ubiquiti EdgeRouter 10X User Manual

Configuring PoE Settings
The PoE setting for port 9 is set to Off by default.
WARNING: Before activating PoE, ensure that the
connected device supports passive PoE and the
supplied voltage.
1. In the Dashboard tab, click Actions > PoE of the Ethernet
port you want to configure.
10X
6
7
6
8
7
9
Disconnected
Disconnected
2. The Interface Configuration window will appear. Select the
appropriate PoE setting, and click Save.
Port 9
Port 9
3. The Ethernet port’s PoE LED will confirm the PoE setting.
For detailed instructions on configuring other features, please
refer to the EdgeOS User Guide. The User Guide is available at
www.ui.com/download/edgemax

Ubiquiti EdgeRouter 10X Specifications

General

Brand	Ubiquiti
Model	EdgeRouter 10X
Category	Network Router
Language	English