Ubiquiti GigaBeam GBE-LR User Manual

Dish Main Arm Stabilizer Arms (Qty. 2)
Mounting Bracket Screw U-Clamp
Flat Washers (Qty. 2) Lock Washers (Qty. 2) Flange Nuts (Qty. 2)
Gigabit PoE (24V, 0.5A) with
Mounting Bracket
Power Cord
Package Contents
GBE-LR Quick Start Guide

Ubiquiti GigaBeam GBE-LR Specifications

General

Brand	Ubiquiti
Model	GigaBeam GBE-LR
Category	Radio
Language	English

Summary

Installation

Initial Device Mounting

Illustrates the first steps of mounting the GBE-LR device.

Pole Mounting Options

Shows mounting GBE-LR on left or right side of the pole.

Mounting Bracket Locking

Rotate the Mounting Bracket clockwise to lock it into position.

Hardware Securing

Illustrates securing the bracket with screws and washers.

Ethernet Cable Connection

Mounting Arm Attachment and Finalization

Connecting Power

Configuration

DHCP and Fallback IP Access

Initial Device Setup

Configure device country, language, and agree to terms.

Wireless Network Configuration

Set AP mode, SSID, and WPA2 key for both devices.

Static IP Configuration

UNMS Management

Alignment

Establishing a Link

Azimuth and Elevation Adjustment

Station Alignment and Locking

Aim Station, repeat aiming, and lock alignment by tightening nuts.

Specifications

General Device Specifications

Operating and Radio Specifications

Safety Notices and Warnings

Important safety instructions and warnings for product use.

Compliance

FCC and ISED Canada Compliance

Radiation Exposure Statement