Ubiquiti UniFi nanoHD Quck Start Gude

20.04.2020 UAP-nanoHD Quck Start Gude
https://dl.ubnt.com/qsg/UAP-nanoHD/UAP-nanoHD_EN.html 1/35
Un  F  nanoHD AP Mount  ng Bracket Ce  l  ng Back  ng Plate
Screws (Qty. 4) Flat Head Screws (Qty. 4) Keps Nuts (Qty. 4)
Package Contents
UAP-nanoHD Qu  ck Start Gu  de

Ubiquiti UniFi nanoHD Specifications

General

Wireless Standards	802.11 a/b/g/n/ac/ac-wave2
Max Aggregate Throughput	2033 Mbps
Frequency Bands	2.4 GHz, 5 GHz
MIMO	4x4
Networking Interface	1x 10/100/1000 Ethernet Port
Supported Voltage Range	44-57VDC
Max. Power Consumption	10.5W
BSSID	Up to 8 per Radio
Operating Temperature	-10 to 70° C (14 to 158° F)
Operating Humidity	5 to 95% Noncondensing
Ports	1x 10/100/1000 Ethernet Port
PoE	802.3af
Weight	300 g
Wireless Security	WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
Power Method	802.3af PoE
Max. TX Power	2.4 GHz: 26 dBm, 5 GHz: 26 dBm
Data Rates	802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps; 802.11b: 1, 2, 5.5, 11 Mbps; 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
Maximum Speed	1733 Mbps (5 GHz), 300 Mbps (2.4 GHz)
Mounting	Wall/Ceiling
Management	UniFi Controller
Antenna Gain	3 dBi (2.4 GHz), 4 dBi (5 GHz)