Ubiquiti UniFi Security Gateway PRO User Manual

Using SFP Ports
To use an SFP port:
1. Remove the protective plug covering the SFP port.
2. Plug a compatible fiber module into the SFP port.
Note: The corresponding WAN port will be deactivated.
3. Connect a fiber optic cable to the fiber module. Then
connect the other end of the cable to another fiber device.
50
For information about compatible fiber SFP modules, visit:
community.ubnt.com/unifi

Ubiquiti UniFi Security Gateway PRO Specifications

General

Brand	Ubiquiti
Model	UniFi Security Gateway PRO
Category	Network Router
Language	English