Ubiquiti UniFi Security Gateway XG-8 User Manual

Front Panel Button
Reset
Button Description
Reset
Resets to factory defaults. The UniFi
Security Gateway XG should be running
after bootup is complete. Press and hold
the Reset button for about 10 seconds until
the System LED starts flashing and then
becomes solidly lit. After a few seconds,
the LED will turn off, and the UniFi Security
Gateway XG will automatically reboot.

Ubiquiti UniFi Security Gateway XG-8 Specifications

General

Brand	Ubiquiti
Model	UniFi Security Gateway XG-8
Category	Gateway
Language	English