Ubiquiti UVC-G3-LED User Manual

3. Insert the Accessory Connector into the accessory port until
it locks into place.
4. Tighten the two screws located at the bottom of the LED
Ring to secure it.
Important: Do not over-tighten the two screws. Excessive
torque may damage the LED Ring and/or the UVC-G3.
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com

Ubiquiti UVC-G3-LED Specifications

General

Brand	Ubiquiti
Model	UVC-G3-LED
Category	Security Camera
Language	English