EasyManuals Logo

Ublox SARA-R4 Series System Integration Manual

Ublox SARA-R4 Series
157 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #130 background imageLoading...
Page #130 background image
SARA-R4/N4 series - System Integration Manual
UBX-16029218 - R11 Approvals Page 130 of 157
4.2 US Federal Communications Commission notice
United States Federal Communications Commission (FCC) IDs:
u-blox SARA-R404M cellular modules: XPY2AGQN1NNN
u-blox SARA-R410M and SARA-N410 cellular modules: XPY2AGQN4NNN
u-blox SARA-R412M cellular modules: XPYUBX18ZO01
4.2.1 Safety warnings review the structure
Equipment for building-in. The requirements for fire enclosure must be evaluated in the end product
The clearance and creepage current distances required by the end product must be withheld when the
module is installed
The cooling of the end product shall not negatively be influenced by the installation of the module
Excessive sound pressure from earphones and headphones can cause hearing loss
No natural rubbers, hygroscopic materials, or materials containing asbestos are employed
4.2.2 Declaration of Conformity
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
this device may not cause harmful interference
this device must accept any interference received, including interference that may cause undesired
operation
Radiofrequency radiation exposure information: this equipment complies with the radiation exposure
limits prescribed for an uncontrolled environment for fixed and mobile use conditions. This equipment
should be installed and operated with a minimum distance of 20 cm between the radiator and the body
of the user or nearby persons. This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter except as authorized in the certification of the product.
The gain of the system antenna(s) used for the SARA-R4/N4 series modules (i.e. the combined
transmission line, connector, cable losses and radiating element gain) must not exceed the value
specified in the FCC Grant for mobile and fixed or mobile operating configurations:
SARA-R404M modules:
o 13 dBi in 750 MHz, i.e. LTE FDD-13 band
SARA-R410M-01B modules:
o 3.67 dBi in 700 MHz, i.e. LTE FDD-12 band
o 4.10 dBi in 850 MHz, i.e. LTE FDD-5 band
o 6.74 dBi in 1700 MHz, i.e. LTE FDD-4 band
o 7.12 dBi in 1900 MHz, i.e. LTE FDD-2 band
SARA-R410M-02B, SARA-R410M-52B and SARA-N410-02B modules:

Table of Contents

Other manuals for Ublox SARA-R4 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ublox SARA-R4 Series and is the answer not in the manual?

Ublox SARA-R4 Series Specifications

General IconGeneral
BrandUblox
ModelSARA-R4 Series
CategoryControl Unit
LanguageEnglish

Related product manuals