Uconnect 3 - Connecting;Disconnecting a Mobile Phone or Bluetooth Device; Pairing a Phone

Main Functions
The buttons on the display can be used to:
• Compose phone numbers (using the graphic keypad on
the display)
• Display and call the contacts on the mobile phone
phonebook
• Display and call contacts from the “recent calls” menu
• Pair up to ten phones/audio devices to make access and
connection easier and quicker
• Transfer calls from the system to the mobile phone and
vice versa
• Deactivate the microphone audio for private
conversations
The mobile phone audio is transmitted through the vehi-
cle’s audio system. The system automatically mutes the
radio when the Phone function is used.
Connecting/Disconnecting A Mobile Phone Or
Bluetooth Device
Pairing A Phone
To begin using your Uconnect Phone, you must pair your
compatible Bluetooth enabled mobile phone. Mobile phone
pairing is the process of establishing a wireless connection
between a cellular phone and the Uconnect system
To complete the pairing process, you will need to reference
your mobile phone Owner’s Manual. Please visit
UconnectPhone.com for complete mobile phone compat-
ibility information.
NOTE:
• You must have Bluetooth enabled on your phone to
complete this procedure.
• The vehicle must be in PARK.
1. Place the ignition in the ACC or ON position.
2. Push the PHONE button on the faceplate.
• If there is no phones currently connected with the
system, a pop-up will appear asking if you would like
to pair a mobile phone.
3. Select “Yes” to begin the pairing process.
5
PHONE MODE 25