Uctronics WIFI Smart Robot Car Kit - Specification; 4 WD Driver Motor Robot Smart Car Chassis Kits

Smart WIFI Robot Car Kit for Arduino
10
www.uctronics.com
2.3.1 Specification
 Size: 23x12.2x29 mm
 Torsional moment: 1.5kg/cm
 Working voltage: 4.2V-6V
 Temperature range: 0℃-55℃
 Operating speed: 0.1 seconds /60°
 Dead band width: 10 microseconds
 The maximum rotation angles of left and right are around the same.
2.4 4WD Driver Motor Robot Smart Car Chassis Kits
With the car platform, adding micro-controller (such as Arduino) and sensor modules, then
program it, a robot car comes up.
All the module interfaces have been modified with XH2.54 ports as to make it much easier
and convenient to assemble the car.