Smart WIFI Robot Car Kit for Arduino
50
www.uctronics.com
As the picture shows the ‘UCTRONICS’ hotspot
If connect successful, the app will
remind you ‘Connect successfully!’ Now
you will see the scene from the car’s
camera. At the same time, you can
operate the joystick on the screen to
control the car. The left joystick is to
control servo and the right joystick is to
control the motor.
7.3 Function introduction
You can take a picture or record a video
or make a speaker work.
Click this button then you will come into
setting windows.
1. Reset the servo to the middle
position
2. Start tracking mode. After clicked, it
will changed to stop tracking
3. Automatic avoidance of obstacles
4. Choose wifi
5. Refresh the app In case of accident.
6. Setting choose
7. Exit the application
To Next Page
Loading...