UE Systems Ultraprobe 9000 Manual

18
MENU 08: DATE FORMAT
Date format can be changed from the US (month/day/year) to the international:
(day/month/year).
TO CHANGE THE DATE FORMAT
Make sure the Ultraprobe is off.
Press (click) both the yellow Store button and the Sensitivity dial at the same time, then
squeeze and hold the trigger.
When in the first Menu Selection, “Data Transfer” (Menu 01), the user may move to any of
the other Menu Selections by spinning the Sensitivity Control up or down (clockwise or
counter clockwise).
Spin to “Date Format”, (Menu 08) blinks.
Click the Sensitivity Control Dial to enter the Date Format enable mode.
Click in the Sensitivity Control
The mm/dd/yy will be blinking
Spin the Sensitivity Control to dd/mm/yy
Click the Sensitivity Control to exit

UE Systems Ultraprobe 9000 Specifications

General

Brand	UE Systems
Model	Ultraprobe 9000
Category	Measuring Instruments
Language	English