Mac
Open [Finder] ---> [ Application] ---> [Pen Tablet], then click "Uninstall Pen Tablet "
and follow the on-screen instructions.
Image 5-1: Mac Un install
NOTE:
When attempting to reinstall the M708 driver, be sure to reboot your computer
after the uninstall is complete.
{VI. FAQ}
1.
Can't use the stylus to control the cursor.
a.
Does the pen tablet's status indicator light turn on when the stylus is in
contact
with the active area?
b.
Yes: Uninstall the M708 driver and reboot, then connect the pen tablet to your
computer and test your stylus. If the cursor responds
to your pen input,
the pen
tablet's hardware is functional. Reinstall the M708 driver according
to
these steps (Windows);
c.
Download the pen tablet's latest driver from www .ugee.net, then extract the.zip contents to the desktop.
d.
Connect the pen tablet then run the driver installation.
e.
Complete the installation, then reboot.
2.
How do I know that the M708 driver installed successfully?
After installing the driver, the M708's driver icon
should be visible in yoursystem tray on the bottom-right of your screen
(Windows OS) and d
esktop. Pen
input will control the cursor and pressure sensitivity will be functional in the driver.
3.
How do I determine if a problem is software or hardware related?
a.
Connect and install the M708 on a different computer. If the pen tablet
functions properly on the new computer, you are
experiencing a software
issue—confirm that all pen tablet drivers (including the M708) are
uninstalled and removed from your
computer
, then reinstall the M708.
b.
The M708's indicator lights will help you determine if an issue is hardware-
related. If functioning properly, the white status
indicator light will
light up when the stylus pen is in range or touching the pen tablet's
active area.
If you have any questions, please contact us at:
Web: www.ugee.net
Email: support@ugee.com.cn
To Previous Page
Loading...