ULNA CPE-966 - Specifications

UlnaBrand
10. Dynamic MIMO power saving mode (DMPS) and APSD；
11. Support 24V POE power supply, easy to install and deploy；
12. Support WEB GUI access management device.
CPE - 966
7620A+7612E+IP1001
8MByte
DDR2 64MByte
10/100/1000Mbps LAN*1 & 10/100Mbps LAN*1
11a: 54M,48M,36M,24M,18M,12M,9M,6Mbps
11n: 7.2M,14.4M,21.7M,28.9M,43.3M,57.8M,65M,72.2M,
14.4M28.9M,43.3M,57.8M,86.7M,115.6M,130M,
144.4Mbps 433Mbps
Direct Sequence Spread Spectrum(DSSS)
OFDM/BPSK/QPSK/CCK/DQPSK/DBPSK
IEEE802.11ac IEEE802.11n,IEEE802.11a ,IEEE802.3u
CSMA/CA,TCP/IP,IPX/SPX,NetBEUI,DHCP,NDIS3,NDIS4,
NDIS5
4900～6100MHz
≤3W, POE 24V~1A/48V~0.5A
16dBi,Horizontal 60°/Vertical 30°
Support
Support
Model
CPU
Flash
DRAM
Interface
Data rate
Transfer method
Modulation
Protocol standard
Agreement
Frequency Range
Power
Antenna
WEP GUI
Telnet
Support
WEP 64/128bits,WPA,WPA2,802.1x
-30～65℃
11.8*11.5*2.7 inch & 2.2 LB
Serial
Safety
Temperature
Box Size & Weight
3. Specifications
02
support01@ulnastore.com