The Ultima Operator is a gate automation system designed for both residential and commercial applications, offering enhanced convenience and security. It is available in two main models: the RT25/50 for Regular Traffic and the HT18/36 for High Traffic, each with specific capabilities and specifications.
Function Description:
The Ultima Operator is a sliding gate motor that automates the opening and closing of gates. It is controlled by a Tritek Control Board, which manages various functions including collision detection, remote access, time-based operations, and safety features. The system supports both 12V and 24V power supplies, making it adaptable to different power sources, including solar panels. It can be operated manually in case of power failure or for maintenance. The operator is designed to work with various external devices such as safety beams, keypads, intercoms, and loop detectors, providing a comprehensive access control solution.
Important Technical Specifications:
Controller System:
- Dual Processor: Main - ARM core - 90 DMIPS, Supply - Microchip - 8 MIPS.
- Supply: Intelligent multi-stage dual switch mode (3.5V, 5V, 7V, 13 - 29.4V).
- Motor Drive: Single / Dual H-Bridge 56 Amp.
- Inputs: INF/CLS, INF/OPN, LOCK, TRIG, PED, LOOP, LIGHT, TAMPER, REV1, MARKER1, GSM.
- Outputs: LIGHT, LOCK, ALARM, PULSE, STATUS, MOTOR.
- Display: 8192 pixels (128 x 64) graphical LCD with familiar icon navigation.
- Audio: 16 Ohm 0.25W speaker with English voice prompts and warning messages.
- Navigation: Joystick - 5 way.
- File System: FAT (USB interface).
- Users: 16,384 Buttons, 1024 Users.
- Event Log: 1024 Events (on-screen viewing & downloadable to Flash).
- Battery Charger: 1.5A Intelligent multi-stage charger with automatic shutdown, current limiting, and power save mode (12V/24V auto detect, 12V Boost cycle up to 2A @ 14.7V, 24V Boost cycle up to 0.8A @ 29.4V).
- Security Alarm Features: Forced Entry, Ambush, Break In, Gate Stand Open, Motor Tamper.
Supply System:
- Transformer Input Voltage: 110V-120V or 220V-240V AC +/- 10%, 50-60Hz.
- Controller Input Voltage: 12V - 24V AC or 17V - 44V DC.
- Motor Voltage: 12V - 24V DC.
- Motor Supply: Battery (12/24V) or Transformer driven.
- Peak Power Consumption: 37.4W (156mA @ 240V).
- Typical Power Consumption: Less than 1.7W (7mA @ 240V).
- Current Consumption (motor at rated load): Up to 20A.
Collision Detection and Prevention:
- Sensing: Current, Motion, and Supply Sensing.
- Multistage Electronic Collision Detection: 4 Channels 5 stages each.
- Current Sensing: 2 Channels 5 stages each (including dynamic sensing and profiling).
- Supply Sensing: 1 Channel.
- Infrared Safety Devices: Open & close infrared inputs.
- Beam Self Test: On compatible devices.
- Loop Detection: Yes.
- Anti-Crush Zone: Yes.
- Multi User Mode: Yes.
Gate Specifications:
- Maximum Gate Mass: RT25/50: 500kg (Regular Traffic), 300kg (High Traffic); HT18/36: 600kg (Regular Traffic), 300kg (High Traffic).
- Maximum Pull Force: RT25/50: 22kgf / 220N, 18kgf / 180N; HT18/36: 28kgf / 280N, 18kgf / 180N.
- Maximum Running Force: RT25/50: 15kgf / 150N, 12kgf / 120N; HT18/36: 18kgf / 180N, 12kgf / 120N.
- Maximum Gate Size: 20m.
- Maximum Operations per day: 150 (gate mass and battery dependant), >1000 (when transformer driven).
Usage Features:
- Setup Wizard: Guides the user through the initial programming of gate limits and collision sensing.
- Remote Settings: Allows programming of up to 1024 remotes, with options for single function, multi-function, and group assignments. Features include Auto Learn, Edit Remotes, and Delete Remotes.
- Pedestrian Entry: Configurable for partial opening of the gate for pedestrian access, with adjustable delay times.
- Light Settings: Controls courtesy lights, with options for set timers, flash on moving, pre-open/close flash, and flashing speed.
- Security Settings: Includes Ambush Alarm, Break In Alarm, Tamper Alarm, Gate Open Alarm, and Securi-Lock features.
- Lock Settings: Supports Electric and Magnetic Locks, with options for pre-open/close delay and enabling/disabling locks.
- Operating Modes: Standard Mode, Condo/Multi User Mode, and Operator Type selection.
- GSM Settings: Allows adding/deleting phone numbers, sending warning messages, and balancing USSD numbers for remote control via GSM.
- Energy Saving: Features Deep Sleep and Solar Sleep modes to conserve battery power.
- USB Settings: Enables saving/restoring user settings, gate settings, log files, and software updates via USB flash drive or Android device.
- HID Settings: Adjusts display contrast, cursor speed, click speed, voice assistant, notifications, and warning sounds.
- Diagnostics: Runs self-diagnostic tests on the controller to check inputs and outputs.
- General Settings: Includes Factory Reset, Controller Info, and Enable Demo Mode.
- Time Manager: A powerful feature for time-restricted access and function control, allowing disabling inputs, activating outputs, and controlling remote groups during specific times.
- Holiday Lockout: Disables all triggers, useful for extended periods when the gate should remain closed. Can be activated via LCK/STP input or a programmed remote button.
- Ground Loop: Connects to the controller via the Loop input for vehicle detection and control.
Maintenance Features:
- Service Schedule: Provides weekly, monthly, and annually recommended checks.
- Weekly: Clear any dirt, sand, stones, or foliage from the gate rail. Ensure branches do not interfere with gate movement.
- Monthly: Check for damage/cracks to the motor lid. Inspect the operator lid for insects.
- Annually: Check battery condition (disconnect mains, run gate 5 times, read voltage), guide rollers, brackets, theft deterrent devices, motor security, and rack for damage.
- Oil Level Check: The gearbox should be filled with SAE75W-90 oil before commissioning and topped up periodically.
- Software Updates: Controller software can be upgraded via USB flash drive or Android device.
- Notification Messages: Provides alerts for various events such as Marker OK, Armed status, Menu Lock Released, Beams OK, New TX Learned, Auto Learn Mode Exited, File Operations, Remote Activation, Limit Reset, and Run Setup Wizard First.
- Warning Messages: Informs about critical issues like Low Battery, Obstruction, Safety Beam Blocked, Holiday Lockout, Motor Fuse Blown, H-Bridge Fault, Motor Disconnect, Mains Fail, Party Mode, and Access Denied, along with suggested solutions.
Need help?
General
To Next Page
