NOTE: The Bluetooth connection button will blink rapidly, indicating that the speaker is ready for pairing.
On your device, go to the Bluetooth menu and scan for devices.
Select MEGABOOM from the list of devices.
Once paired and connected, you’ll hear an audible confirmation from the speaker. Your MEGABOOM is now ready to use with the device you added. NOTE: While the speaker can store up to eight paired devices, it can only maintain an active connection
with two of them at a time. See “Can I use my speaker with more than one device at a time?” for more information. Reconnecting to a device To reconnect a device to your MEGABOOM after the initial pairing or after pairing another device:
Turn the speaker on
On your device, go to the Bluetooth menu and select MEGABOOM from the list of devices.
Once reconnected, you’ll hear an audible confirmation from the speaker. Your MEGABOOM is now ready to use with the device you selected.
6) Why won’t my Bluetooth device connect to my MEGABOOM?
If your Bluetooth device won’t connect to your MEGABOOM, try the following:
Make sure your device is paired with your speaker and Bluetooth is active (see “How do I pair additional Bluetooth devices with my MEGABOOM?”).
Place your Bluetooth device closer to the speaker – it might be out of range.
Move your Bluetooth device and speaker away from other wireless sources – you could be experiencing interference.
If you have multiple MEGABOOM speakers, make sure you’re connected to the correct one.
The MEGABOOM can be connected to up to two devices at a time – make sure you don’t already have two devices connected.
Turn your MEGABOOM off, and then back on again.
NOTE: If this is the first time you’re pairing a device with your speaker, you don’t need to press the Bluetooth connection button. It comes out of the box ready to pair.
7) What should I do if the audio is distorted or drops out on my MEGABOOM?
If you’re having trouble with audio distortion or drop-outs on your MEGABOOM, try these suggestions:
Move the audio source closer – it might be out of the range of your speaker.
Move away from other sources of wireless signal – you could be experiencing interference.
Make sure your speaker has enough battery power (connect it to a power source with the supplied adapter).
Adjust the volume on both the audio source and your speaker.
Restart both your speaker and the audio source.
Re-pair your device with your speaker (see “How do I pair additional Bluetooth devices with my MEGABOOM?”).
If you’re using two MEGABOOM speakers (in Double Up mode), try disconnecting and streaming to one speaker only.
NOTE: If you’re streaming audio content from the internet, the issue could be with the internet connection and not your speaker.
8) How do I update the software on my MEGABOOM?
Software updates for your MEGABOOM can be done using the MEGABOOM app. Download it from the Apple App store for your iOS device or from the Google Play store for your Android device. Once you have the MEGABOOM app, here’s how to
apply the update:
Connect your MEGABOOM to your smarphone or tablet.
Open the app.
Tap MORE
Tap the Update Now message to begin the update.
To Previous Page
Loading...
Need help?
General
Weight and Dimensions
