ULTIMATE SPEED ULG 17 A1 Operation And Safety Notes Translation Of The Original Instructions

GB
7
z Parts description
For this, see Fig. A and B:
1
Digital Display button
2
Battery Type button
3
Charge Start button
4
“–” pole connection terminal (black)
5
“+” pole connection terminal (red)
6
Digital display
7
Mains cable
8
Fuse with cover
PLEASE NOTE: The use of the term “product” or “device” in the following text refers to the
car battery charger named in these operating instructions.
z Technical Specifications
Input voltage: 230 V ~ 50 Hz
Return current*: < 5mA (no AC input)
Nominal output voltage: 6V/12V
Charge current: 2A, 6A, 17 A ± 10%
Battery type with: 12V/6V and 8–250Ah capacity
Housing protection type: IP 20
* = Return current means the current that the car battery charger consumes from the battery when no
mains current is connected.
Changes to technical and visual aspects of the product may be made as part of future developments
without notice. Accordingly, no warranty is offered for the physical dimensions, information and speci-
fications in these operating instructions. The operating instructions cannot therefore be used as the basis
for asserting a legal claim.
PLEASE NOTE: The maximum load current essentially depends on the internal resistance of the
connected battery. This internal resistance is determined by the following factors: ages, capacity and
type of connected battery.
z Safety instructions
KEEP OUT OF THE REACH OF CHILDREN!
 DANGER! Avoid danger to life and danger of injury from
improper use!
392476_2201 Kfz-Ladegerat mit Starthilfefunktion ULG 17 A1_content_LB4.indb 7392476_2201 Kfz-Ladegerat mit Starthilfefunktion ULG 17 A1_content_LB4.indb 7 13.04.22 11:2913.04.22 11:29

ULTIMATE SPEED ULG 17 A1 Specifications

General

Display	LCD
Input Voltage	220-240 V AC
Output Voltage	12 V
Battery Capacity Range	1.2 - 120 Ah
Protection	Reverse Polarity
Operating Temperature	0°C to +40°C
Charging Modes	Normal, Winter