GB / IE / NI 11
immediately with clean water
and seek medical attention�
Product-specific safety
instructions
We recommend charging the
power bank with compressor
6
once a month�
A slightly higher temperature
during charging is absolutely
normal and not a malfunction�
However, we do recommend
leaving the power bank with
compressor
6
to rest for
15 minutes before using�
Protect the power bank with com-
pressor
6
from moisture and
high temperatures, including fires�
Store the power bank with com-
pressor
6
in a dry place and
protect the device from moisture
and corrosion�
If you notice the power bank
with compressor
6
leaking,
producing an unusual odour or
looking deformed in any way,
stop using the device immedi-
ately and contact the
manufacturer�
Do not drop the power bank
with compressor
6
while it is
being used�
The power bank with compres-
sor
6
is designed for use with
car tyres� It is not designed for
use with large tyres like tractor
or truck tyres�
During inflation, high temper-
atures can be produced at the
air outlet� There is a risk of burn
injuries!
When using the jumper cable
11
, ensure that the blue plug
is securely plugged into the
vehicle jump-start outlet
7
�
When using the jumpstart fea-
ture, ensure that 3 indicator
lights
5
are illuminated�
If the blue LED lamp goes out
during the jumpstart, charge the
power bank with compressor
6
�
If the vehicle does not start after
3–5 attempts, stop the jumpstart
procedure and check to see if
there are other reasons why the
vehicle is not starting�
Product-specific safety instructions
To Next Page
Loading...
Need help?
General
