STEP 1
Tripod Base: Loosen Z-knob at base, slide base down, tighten
Z-knob and lock legs into place.
Weighted Base: Shaft screws into weighted base.
Stackable Base: Shaft screws into stackable base.
STEP 2
Turn the ergonomic, patented Quarter-Turn Clutch counter
clockwise a quarter turn. Adjust stand height up or down.
Securely retighten clutch by turning clockwise.
STEP 3 Universal Mic Attachment
To adjust U.S. to metric, use 1.5 Allen
Wrench to unlock threads. Turn U.S.
threads counter clockwise until it is
removed. U.S. lock nut will come off too.
STEP 4 Universal Mic Attachment
After choosing desired thread, place mic
clip on universal mic attachment. Then
turn lock nut counter clockwise to lock mic
clip in place.
Metric
Thread
Lock
Nut
Lock
Nut
1.5 Allen
Wrench
Ergonomic
Patented
Quarter-Turn
Clutch
Z - KNOB
Legs Lock
in Place
Pro Series Set-up Instructions Ulti-Boom Pro Set-up Instructions
Rotate
Pan
Depth
Tilt
Patented
ONE-TOUCH ADJUSTMENT
Controls tilt, pan, depth, and rotation from
just one ergonomic Z-knob!
Fixed & Telescoping Ulti-Boom Pro
Telescoping Ulti-Boom Pro
STABLELOCK™ LEVER
StableLock lever provides fast telescoping
adjustment with non-slip security.
1
2
3 4
U.S.
Thread
To Previous Page
Loading...
Need help?
General
