Ultimate Support SP-100 - User Manual

SATELLITE POLES
Manual
Visit ultimatesupport.com
to download a detailed
product manual, read full
warranty details and to
register for warranty.
800.525.5628 . www.ultimatesupport.com . Copyright 2017, Ultimate Support Systems . All Rights Reserved
SP-100 SP-90 SP-80
SP-100 HEIGHT ADJUSTMENT
Handle
Handle
Using Air-Powered Lift Assist
Put speaker on stand. Firmly grip handle, loosen
z-knob and guide telescoping tube to desired height.
Tighten z-knob. CAUTION: For light speakers, grip
handle tightly while loosening z-knob.
To lower speaker, firmly grip handle, loosen z-knob
and guide telescoping tube down. Lighter speakers
will take more effort to lower. Tighten z-knob.
Loosen
Z-Knob
to Release
Tighten
Z-Knob
to Hold
This stand carries a gas powered shock that
pushes up when z-knob is loosened. Keep clear of
telescoping tubing and make sure z-knob is fully
tightened. For best results when lowering stand,
keep speaker on stand.
Caution!
Lift speakers
weighing
35-45 lbs.
with ease!

Ultimate Support SP-100 Specifications

General

Category	Racks & Stands
Type	Speaker Stand
Weight Capacity	150 lbs
Base Type	Tripod
Color	Black
Product Name	SP-100

Summary

SP-100 Height Adjustment

SP-100 Air-Powered Lift Assist Operation

Instructions for adjusting speaker height using the SP-100's air-powered lift assist system.

SP-100 Height Adjustment Safety

Warning about gas shock and proper z-knob use for safe SP-100 height adjustment.

Attaching Speaker Poles to Subwoofer

Seating Speaker Pole in Subwoofer

Steps for inserting and tightening the speaker pole into a subwoofer connection.

Fully Seating Speaker on Pole

How to properly seat the speaker on the pole using its weight for stability.

SP-90 Height Adjustment System

SP-90 TeleLock Height Adjustment

Guide to adjusting SP-90 speaker stand height using the TeleLock dial.

SP-90 Pole to Subwoofer Connection

Instructions for using 20mm threads to connect the SP-90 pole to a subwoofer.