Need help?Do you have a question about the Ultra Power UP240AC Plus and is the answer not in the manual?
General| Brand | Ultra Power |
|---|---|
| Model | UP240AC Plus |
| Category | Battery Charger |
| Language | English |
Never leave the charger unsupervised; terminate process immediately if malfunction is found.
Ensure battery specifications meet charger requirements to prevent damage or fire.
Connect charge cable to charger first, then battery, to avoid short circuits.
Do not charge mixed cell types, fully charged, non-rechargeable, or faulty batteries.
Features AUTO function for safe charging/discharging, preventing overcharging and malfunctions.
Charger MUST be powered before connecting battery to prevent failure or damage.
Essential to check charging parameters and polarity before connecting any battery.
Connect charge leads to charger first, then battery, to avoid short circuits.
Connect balance wire to the charger with correct polarity (black wire to negative marking).
Flow charts for LiPo, Lilo, LiFe, LiHV - BALANCE, CHARGE, FAST CHG, STORAGE, DISCHARGE.
Balances individual cell voltages during charging for equalization.
Connect battery's power lead and balance wire; processor monitors and controls charging current per cell.
Indicates incorrect polarity connection.
Covers connection breaks, main port errors, and balance connection errors.
Cell voltage too low, too high, or invalid; incorrect cell number.
Internal or external temperature goes too high.
Over charge capacity limit or over time limit reached.
To Next Page
