WARNING: The test button accurately tests the alarm’s components and
functions. Do not expose the alarm to an open ame. You may contaminate and
damage the sensor, preventing the alarm from providing adequate protection
from real res, and invalidate the warranty. You may use an approved smoke
detector test spray to test your detector.
Note: When testing a single alarm, because the alarm transmits a wireless
signal, other connected alarms should also sound. Once the test button has been
released, the other alarms will silence within 1 minute.
Do not paint smoke or heat alarms. Your alarms should be cleaned every 3
months, using a vacuum cleaner tted with the soft brush attachment.
WARNING: Do not attempt to remove the cover to clean inside. This will aect the
warranty.
Cleaning
Do not attempt to repair the alarm yourself; dismantling the alarm will aect your
warranty. If the alarm is not operating properly, and it is still under warranty,
contact the retailer who sold you the product or the manufacturer.
Repairing
13
To Next Page
Loading...
