Problem Action
Alarm does not sound when tested.
Remove alarm head from the
baseplate. Check batteries are
installed properly and have power.
Alarm chirps with the red LED ash
about every 50 seconds.
Replace batteries as described in the
Maintenance section.
Regular false alarms.
1. Clean the alarm as described in the
Maintenance section.
2. Move the alarm to a new position in
the room.
Alarm chirps about every 50 seconds.
1. Clean the alarm as described in the
Maintenance section.
2. Replace the alarm. Contact the
retailer or manufacturer if still within
warranty period.
Alarm fails to interlink to a
network.
Follow the steps to clear the interlink
code and try to interlink the alarm
again using a dierent alarm as the
master.
To Next Page
Loading...
