UltraPower UP9 - Standard Battery Parameters

STANDARD BATTERY PARAMETERS
6
Rated Voltage
Full Charge Voltage
Storage Voltage
Pre-charge Voltage
Balance Charge
Unbalanced Charge
Support Cells
Max Charge Current
Be EXTREMELY careful to choose the correct voltage settings based
on the cells and chemistry of the battery being charged. Failure to do
so may result in battery damage, explosion, or fire!
LiHV
3.80V
4.35V
3.90V
3.20V
supported
5.0A
supported
1-6S
LiFe
3.20V
3.60V
3.30V
2.90V
supported
5.0A
supported
1-6S
Pb
2.00V
2.40V
Not supported
2.00V
Not supported
5.0A
supported
1-12S
NiCd/NiMH
1.20V
1.40V
Not supported
/
Not supported
5.0A
supported
1-16S
LiIon
3.60V
4.10V
3.70V
3.10V
supported
5.0A
supported
1-6S
LiPo
3.70V
4.20V
3.80V
3.20V
supported
5.0A
supported
1-6S