INSPECT THE FOLLOWING ITEMS BEFORE YOU GET ON THE MOTORCYCLE
PRE - RIDE INSPECTION
ITEM
ACTION
FUEL
Check fuel level and add enough for distance to ride. Close fuel cap properly.
LEAKS
Check for possible fuel leaks from the tank and oil leaks from the engine.
ENGINE OIL
Check oil level and add if necessary.
COOLANT
Check the coolant level and if necessary maintain the level between High & Low mark.
TIRES
Check tire pressure when tires are cool. Adjust tire pressure if necessary. Check for air leaks.
WHEELS
Check wheels for damage and verify that wheel axles are tight.
DRIVE CHAIN
Check chain for wear and tight spots. Check and adjust tension if necessary.
Lube chain as needed.
CABLES
Check cables for wear or breaks.
NUTS & BOLTS
Check all accessible nuts and bolts and make sure they are tight.
THROTTLE
Check free play and adjust if needed. Rotate the throttle to make sure it moves freely and snaps
shut automatically when it is released in all steering positions.
CLUTCH LEVER
Check for smooth operation and adjust if needed.
BRAKES
Squeeze the front brake lever and step on the rear brake pedal to check that the controls
operate normally. Check for proper freeplay and adjust if necessary. Check front and rear pad
ELECTRICAL
COMPONENTS
Check proper operation of headlight and taillight, check turn signals and brake light, check
horn and electric starter.
RENEGADE II
125 SERIES EFI
27
To Next Page
Loading...
Need help?
General
