EasyManua.ls Logo

um RENEGADE II COMMANDO - Engine Misfiring and Lack of Power

um RENEGADE II COMMANDO
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TROUBLE SHOOTING
Clutch Cable free play excessive & clutch slipping
Brakes adjusted too tight
Worn out Cyl-Piston parts
Adjust cable free play
Re-adjust properly
Change service limit exceeded parts
Water in petrol tank/ Fuel Line
Loose/Leak through intake hose/line
Loose spark plug
Spark plug fouled /insulation broken
Loose Connection in Ignition coil & suppressor cap
Clean throttle body/Petrol tank, Fill the tank with fresh petrol
Tighten rubber hose/line suitably, Replace if necessary
Fix cap/lead firmly
Clean/reset gap or replace
Ensure the all the connections
• POSSIBLE CAUSES • ACTIONS TO BE TAKEN
3. Vehicle cranks but does not starts (Engine Misfiring)
POSSIBLE CAUSES • ACTIONS TO BE TAKEN
4. Engine lacks power
Faulty fuel supply
Clutch Cable free play excessive & clutch slipping
Accelerator cable free play excessive
Air filter
Rear chain adjusted too tight
Brakes adjusted too tight
Under inflated tyres
Clean the fuel line /pipes/vent holes
Adjust cable free play
Adjust cable free play
Clean/Replace air filter
Re-adjust properly
Re-adjust properly
Inflate to correct Tyre pressure as recommended
RENEGADE II
125 SERIES EFI
36

Related product manuals