UDP3305S Series Programmable DC Power Supply User Manual
4.7 Save and Read the Timer/Delay File
Users can store the timer/delay parameters edited manually or using the template in internal or external memory
and recall them when required.
Save
The instrument can store 10 groups of setting values of the three functions of list mode, delayer and state file
respectively, and also supports external storage.
Press to enter the state storage interface. The storage contents include the present setting values of voltage
and current of each channel, overvoltage and overcurrent values, the setting values of triggers and monitors, upper
computer connection baud rate and IP address, etc.:
State file storage interface (the file suffix is STA)
After entering the list mode function, press “storage” to save/read.
List mode storage interface (the file suffix is LIST)
After entering the delayer function, press “storage” to save/read.
To Next Page
Need help?
General
