UNI-T UTP3300C Series User Manual

UNI-T UTP3300C Series Specifications

General

Output Channels	3
Power	195W
Output Current	0-3A/0-3A/0-3A
Load Regulation	<=0.01%+3mV
Line Regulation	<=0.01%+2mV
Voltage Ripple	<=1mVrms
Protection	Over voltage, over current
Input Voltage	50/60Hz
Current Ripple	<=3mArms
Operating Temperature	0~40°C

Summary

Safety Overview

Safety Symbols

Symbols used in the manual and on the device for important warnings and connections.

Safety Guide

General safety instructions, AC input voltage specifications, and fuse information.

Profile

Main Features

Front Panel

Rear Panel

Function

Voltage and Current Settings and Output

How to set voltage, current, and enable/disable output on the device.

Series and Parallel Settings

Series settings

Configuration steps for series output mode for connected channels.

Parallel Operations

Configuration steps for parallel output mode for connected channels.

Recall and Output

Over Current Protection Setting

Over Voltage Protection Setting

Key Lock

Turning on/off Buzzer

Remote Control

COM setting

Computer COM port settings for establishing remote control connection.

RS232 Interface Definition

Pinout and connection details for the RS232 interface cable.

Communication protocol V2.0

Order Format

Structure of commands for controlling the device via the communication protocol.

Order Description

Explanation of specific commands, their parameters, and functions.

Technical Index