UTP3000C Series User Manual
1
Safety Overview
This section discusses the UTP3000C series safety instructions and storage
conditions. Please read the information below carefully before using the device.
Safety Symbols
These symbols will be presented in the manual or the device.
Caution
Risk of Electric Shock
Ground Terminal
Safety Guide
General
• Donot cover the air inlet and fan outlet.
• Avoid physical impact or improper usage of the device.
• Perform ESD protection for the device
• Donot open the device if you are not a specialist.
AC Input
• AC Voltage Input: 100V/120V/220V/230V, 50/60Hz
• Connect ground wire to avoid electric shock
Fuses
The fuses models of the device are:
• Make sure correct fuse is used before power on.
• Replace all broken fuses with fuses of correct specification and rated value.
• Donot connect device to power socket before replacing any fuses in order to
prevent electric shock.
• Find out the reason of broken fuse before replacing.
Model
110V/120V 220V/230V
UTP3303C
T4A
250V(20X5mm) T2A/250V(20x5mm)
UTP3305C
T8A
250V(20X5mm) T5A/250V(20x5mm)
To Next Page
Loading...
