UNI-T UT117C

23
9. Capacitance
1000nF
1nF
±(1.9%+5)
600V AC/DC
10.00 Fµ
0.01µF
100.0 Fµ
0.1 Fµ
10000 Fµ
1µF
±（2.5%+5)
Range
Range
Range
Resolution
Resolution
Resolution
Accuracy±(a% of
reading +b digit)
Accuracy±(a% of
reading +b digit)
Accuracy±(a% of
reading +b digit)
Overload
protection
Overload
protection
Overload
protection
* Auto range (Least significant digit is allowed to be 50 under open circuit.)
* Range to ensure accuracy: 1%~100% of range
* It is recommended to measure in REL mode if measured capacitance is
≤100nF.
* ”OL” is displayed if the input capacitance is ≥10000uF.
10. Continuity
600.00Ω 0.01Ω
600V AC/DC
Circuit open: The buzzer
keeps silent with the
resistance set at about ≥50Ω.
Circuit connected: The
buzzer sounds with the
resistance set at about ≤20Ω.
* Open circuit voltage: About 2V
* The buzzer may sound if the resistance of circuit is 20Ω~250Ω.
* The buzzer sounds with LED light flashing.
11. Diode
6.0000V 0.0001V
±(0.5%+10)
600V AC/DC
* If the measured value is less than 0.1200V, the red light is lit up and the
buzzer makes a long beep.
* Least significant digit is allowed to be about 5 under short circuit.
12. Current probe measurement (ACA/DCA)
600.0A
0.1A
±(1.8%+3)
600V AC/DC
600.0A
0.1A
±(0.8%+2)
ACA
DCA
Range
Resolution
Accuracy±(a% of
reading +b digit)
Overload
protection
Function
* Frequency response: 45Hz~400Hz (Sinusoidal wave; frequency response
refers to the intrinsic frequency response of UT117C)
* Current probe measurement is an input mode of analog voltage, the
conversion ratio is 1mV/1A, and the accuracy specified is the intrinsic
accuracy of UT117C (eliminate the error of current probe).
* Least significant digit is allowed to be about 5 under short circuit.
XIV. Bluetooth software
Bluetooth software
1. Introduction
The Bluetooth software is a mobile APP and supports iOS 10.0 or newer
and Android 5.0 or newer currently.
2. Download (iDMM2.0)
For Android
Method 1: Open the mobile browser and scan the QR code below (Do not
scan by WeChat)
Method 2: Search “iDMM2.0” at our official website.
Method 3: Search “iDMM2.0” at Myapp, HUAWEI APP store, MI APP store,
OPPO APP store or VIVO APP store.
For IOS
Method 1: Open the scanning function of mobile phone and scan the QR
code below (Do not scan by WeChat)
Method 2: Search “iDMM2.0” at “App Store”.
For IOS) (For Android)(
24
UT117C User ManualUT117C User Manual