Need help?Do you have a question about the UNI-T UT120C and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Auto Range | Yes |
| Diode Test | Yes |
| Continuity Buzzer | Yes |
| Data Hold | Yes |
| Auto Power Off | Yes |
| Input Impedance for DC Voltage Measurement | 10MΩ |
| Safety Rating | CAT II 600V |
| Operating Temperature | 0°C to 40°C |
| AC Voltage | 200V to 600V |
| DC Current | 200µA to 10A |
| Frequency | 10MHz |
| Power Supply | 9V Battery |
Key safety warnings and precautions for operating the digital multimeter to prevent hazards.
Details the LCD display and the function of buttons like SELECT, REL, and HOLD.
Step-by-step guide for measuring DC and AC voltages, including safety precautions.
Procedure for measuring resistance, with notes on accuracy and safety.
How to measure frequency and duty cycle using the Hz/% button.
Guide for testing diodes and continuity, including safety precautions.
Steps for measuring capacitance, with important safety and usage notes.
Instructions for measuring DC and AC current, including safety warnings.
Overview of general specifications like input voltage, range selection, and dimensions.
Detailed accuracy specifications for various measurement functions and ranges.
Step-by-step instructions for replacing the meter's battery.
To Next Page
