UNI-T UT120A User Manual

4. Measuring Frequency and Duty Cycle(See Figure 5)
5. Testing Diodes and Continuity(See Dotted Part in Figure 6)
these two
all capacitors
ends
6. Measuring Capacitance(See Figure 7)
As there is a capacitance reading displayed under open-circuit status,
A. General Specifications
（test pens and battery included)
pressing
wake up the meter "button to wake up the meter".
to
in-line
is connected
Technical Specifications
B. Accuracy Specifications
calibration per year.
battery
the battery with a new 3V battery.
conforms to UL STD 61010-1, 61010-2-030, 61010-031,
certified to CSA STD C22.2 NO.61010-1, 61010-2-030, 61010-031’
P/N: 110401105302X
MAY.2018 REV. 1

UNI-T UT120A Specifications

General

Brand	UNI-T
Model	UT120A
Category	Multimeter
Language	English