UT131 Palm Size Multimeter
Notes:
*. When the measured voltage is<0.2V (0.05V-0.19V), no indicator status will be displayed and the
reading will flash for 3 seconds for every 6 second interval.
9. Temperature Measurement (only for UT131C, see Figure 5)
1) Switch the dial to temperature test.
2) Insert K-thermocouple into the device and fix the temperature probe to the measured object.
Read the value when it is stable.
Notes:
Only K-thermocouple is applicable. The measured temperature should be less than 250˚C/ 482˚F
(˚F=˚C*1.8+32)
To Next Page
Loading...
Need help?
General
