G.Make Measurements(10)
8. Temperature Measurement:(Only for UT30C)(see figure 9)
1) Insert the black K type thermocouple
(P/N:41700103) into “COM” socket.
Red lead of temp. probe into “
o
C” socket,
LCD displays the measuring value with
unit in
o
C.
2) The temperature probe limits to below
250
o
C. For a higher degree of temperature
measurement, use another hand-held
thermocouple (P/N:41700107). The LCD
display room temperature when unloading
the probe.
(figure9)
26
Model UT30B/C/D/F: OPERATING MANUAL
To Next Page
Loading...
