17
UT581/582 INSTRUCTION MANUAL
5.4.3 Press PHASE (0°/180°) button, phase switch as repeated Step
(5.4.2 ) to get the fast connecting time.
5.4.4 Need to phase switch and repeated the Step (5.4.2).
Warning
● Do not use the tester if it is damaged or metal part is exposed.
● During the long hours and continually use, the tester may arise in
more heating and cause to the unit damage or / and other danger
arises, so we do not encourge to use in long hours and it is used on
sample random testing purpose only.
● Connecting current 300mA / 500 mA (Main current connecting
measurement) measure need to have at least 5-minutes variation for
next new measurement.
To Next Page
Loading...
