Need help?Do you have a question about the UNI-T UT522 and is the answer not in the manual?
General| Type | Insulation Resistance Tester |
|---|---|
| Display | LCD |
| Auto Ranging | Yes |
| Display Hold | Yes |
| Auto Discharge | Yes |
| Low Battery Indication | Yes |
| Data Logging | No |
| Data Recall | No |
| Data Comparison | No |
| LCD Backlight | Yes |
| Alarm Light Display | Yes |
| Relative Humidity | ≤ 85% RH |
| Test Voltage | 250V, 500V, 1000V |
| Battery | 6 x 1.5V AA batteries |
| Power Supply | Battery |
| Operating Temperature | -10°C ~ 40°C |
| Storage Temperature | -20°C to 60°C |
Details testing methods, connection indications, and over-range displays for accurate measurements.
Details the precision measurement process using standard test leads and ground stakes.
Covers procedures for Earth Voltage testing and Earth Resistance testing.
Details the simple measurement method using 2-wire test leads when auxiliary stakes are not used.
Provides step-by-step instructions for replacing the tester's batteries.
Outlines conditions requiring repair and the process for obtaining service.
To Next Page
