Need help?Do you have a question about the UNI-T UTD1062C and is the answer not in the manual?
General| Bandwidth | 60 MHz |
|---|---|
| Channels | 2 |
| Sample Rate | 1 GSa/s |
| Memory Depth | 40 kpts |
| Rise Time | ≤5.8 ns |
| Timebase Range | 5 ns/div to 50 s/div |
| Weight | 2.5 kg |
| Type | Digital Oscilloscope |
| Display | 7 inch TFT LCD |
| Input Voltage Range | 400 V (DC + AC peak) |
| Trigger Type | Edge, Pulse, Video, Alternate |
| Power | 100-240 VAC, 50/60 Hz |
| Input Impedance | 1 MΩ |
| Interface | USB Host, USB Device |
Explains terminology, warning symbols, and safety messages used in the manual.
Lists essential safety rules, including avoiding hazardous environments and maintaining cleanliness.
Familiarization with the UTD1000's front panel and basic operation.
Steps for checking the unit for shipping damage and verifying accessories.
Performing basic operational tests and calibrating probes for accuracy.
Using auto setup function and navigating the front panel controls for efficient operation.
Restoring factory settings and utilizing the jog dial for efficient operation and menu navigation.
Detailed setup for channel coupling, bandwidth limit, bias voltage, and waveform polarity.
Adjusting time base and horizontal shift for optimal waveform viewing and analysis.
Setting up edge, pulse, video, and alternate trigger modes for stable waveform capture.
Configuring acquisition modes, display type, parameter measurement, and frequency counter.
Saving, recalling, and copying waveforms and setups to internal memory or USB.
Utilizing cursors for precise measurements and applying mathematical operations on signals.
Accessing utility options, battery saving features, and performing auto calibration for accuracy.
Utilizing the device's integrated multimeter capabilities for various measurements.
Demonstrating basic signal observation and measurement of frequency and peak-to-peak values.
Observing signal behavior and changes as it passes through a circuit.
Capturing transient events like pulses and glitches with precise triggering.
Employing techniques to filter noise and stabilize waveforms for clearer observation.
Measuring pulse width and other parameters using on-screen cursors for accuracy.
Checking phase difference between signals using X-Y coordinate mode for circuit analysis.
Techniques for obtaining stable video output signal displays by proper triggering.
Explaining various on-screen messages and their meanings for user understanding.
Guidance for diagnosing and resolving display, signal acquisition, and stability problems.
Step-by-step guide for updating oscilloscope software via USB for improved functionality.
Technical specifications, sampling modes, rates, and accuracy details.
Lists included accessories and provides essential cleaning and care guidelines for the oscilloscope.
To Next Page