UNI-T UT61E User Manual

1. Set the rotary switch to hFE.
2. Insert the multi-purpose socket into the input terminal as shown on figure 10.
3. Insert the transistor to be tested into the corresponding multi-purpose socket jacks.
4.
The LCD display hFE nearest value
Note
l When transistor measurement has been completed, disconnect all the connection
between multi-purpose socket, transistor and the Meter.
Model UT61A/61B/61C/61D/61E: OPERATING MANUAL
36

UNI-T UT61E Specifications

General

True RMS	Yes
Diode Test	Yes
Continuity Buzzer	Yes
Data Hold	Yes
Backlight	Yes
hFE	Yes
Analog Bar Graph	Yes
MAX/MIN Mode	Yes
Relative Mode	Yes
USB Interface	Yes
Input Protection	Yes
Power	9V Battery (6F22)
Display	LCD
Temperature	No
Auto Power Off	Yes
Weight	370g
DC Voltage	1000V
AC Voltage	750V
DC Current	10A
AC Current	10A
Resistance	60MΩ
Frequency	10MHz
Display Count	22000
Duty Cycle	0.1% - 99.9%