UNI-T UT71D User Manual

46
Model UT71A/B/C/D/E: OPERATING MANUAL
Note
The current of the object being measured must >
10A.
5A continuous measurement is allowed.
5A~10A, only 10 seconds continuous measurement
is allowed and the interval between each
measurement must be greater than 15 minutes.
When power measurement has been completed,
first switch off the power, then disconnect the
connection between the adaptor and the outlet.
l
l

UNI-T UT71D Specifications

General

Brand	UNI-T
Model	UT71D
Category	Multimeter
Language	English