Need help?Do you have a question about the UNI-T UT71 and is the answer not in the manual?
General| Diode Test | Yes |
|---|---|
| Continuity Test | Yes |
| Bandwidth (Hz) | 100kHz |
| Data Hold | Yes |
| Relative Mode | Yes |
| MAX/MIN | Yes |
| Analog Bar Graph | Yes |
| True RMS | Yes |
| Type | Digital |
| DC Voltage | 1000V |
| DC Current | 10A |
| AC Current | 10A |
| Temperature | -40°C to 1000°C |
| Battery | 9V |
| Display Count | 6000 |
General introduction to the manual and meter features.
Guide to checking package contents and identifying missing parts.
Details on meter compliance, safety standards, and warning symbols.
Essential rules to prevent injury and damage during meter use.
Covers turning on, battery, power off, and backlight features.
How the meter indicates low battery and the associated warnings.
Identifies key components like LCD, buttons, and terminals.
Explanation of the rotary switch positions and their functions.
Describes the purpose and access methods for various buttons.
Cross-reference of meter functions and their display outputs.
How to use autorange and manual range selection features.
Explanation of display indicators, symbols, and meanings.
Describes the analog bar graph's function and update rate.
How to use the Max/Min mode for recording readings.
Overview of how to perform measurements using the rotary switch.
Step-by-step guide for measuring AC and DC voltages.
Instructions for measuring AC and DC current with safety precautions.
Procedure for measuring resistance with safety notes.
How to perform continuity tests and interpret results.
Guide to testing diodes and semiconductor junctions.
Steps for measuring capacitance, including discharging precautions.
Instructions for measuring frequency and duty cycle.
How to measure temperature using the multimeter and probe.
Explains how to measure 4-20mA current as a percentage.
Guide for measuring power with the UT71E model.
Procedure for storing, clearing, and managing readings.
How to retrieve stored measurement data.
Information on exporting data to a computer via USB.
Steps to enter and navigate the setup menu.
Basic cleaning and care instructions for the multimeter.
Detailed procedure for safely replacing fuses.
Instructions for replacing the multimeter's battery.
Lists safety standards and fused protection details.
Details on display, temperature, dimensions, and weight.
Overview of range, polarity, overloading, and battery deficiency.
A concise list of the multimeter's key features.
Table of functions, ranges, and basic accuracy.
Comprehensive accuracy data for various functions.
Specific accuracy, resolution, and impedance for DC voltage.
Accuracy, resolution, and bandwidth for AC voltage measurements.
Accuracy, resolution, and overload protection for DC current.
Accuracy, resolution, and overload protection for AC current.
Accuracy for resistance and specs for continuity test.
Specs for diode test and accuracy for capacitance measurement.
Accuracy, resolution, and overload protection for frequency measurement.
Accuracy, resolution, and overload protection for temperature measurement.
Specs for 4-20mA current and power measurement.
To Next Page
