Need help?Do you have a question about the UNI-T UT71E and is the answer not in the manual?
General| Data hold | Yes |
|---|---|
| Product type | Digital multimeter |
| Frequency range | 0.04 - 40000 kHz |
| AC current range | 0.4 - 10 A |
| AC voltage range | 4 - 1000 V |
| DC voltage range | 0.4 - 1000 V |
| Capacitance range | 40 - 40000 nF |
| Statistic function | Maximum, Minimum |
| Basic accuracy (frequency) | 0.01%+8 |
| Basic accuracy (DC current) | 0.08%+8 |
| Basic accuracy (DC voltage) | 0.025%+5 |
| Basic accuracy (resistance) | 0.3%+8 |
| Basic accuracy (capacitance) | 1%+20 |
| Temperature measurement range | -40 - 1000 °C |
| Dimensions (WxDxH) | 93 x 40 x 200 mm |
| Battery voltage | 9 V |
Weight and Dimensions| Weight | 384 g |
|---|
General overview of the manual and meter capabilities.
Check package contents for missing or damaged items.
Safety precautions and compliance with IEC standards.
Rules to prevent electric shock, injury, or meter damage.
Explanation of electrical symbols used in the manual and on the meter.
Instructions on how to power on the multimeter.
Information on battery type and power conservation techniques.
Details on the automatic power-saving mode.
Configuration options for the automatic backlight shutdown.
How the meter indicates a low battery status.
Identification of the multimeter's physical components.
Explanation of the rotary switch functions and selections.
Description of the meter's functional buttons and their operations.
Cross-reference of meter functions and their display outputs.
Guide to manual and auto-ranging modes.
Explanation of the multimeter's display features and symbols.
Details on the analogue bar graph for input indication.
How to use the maximum and minimum value recording features.
Overview of measurement procedures and function selection.
Instructions for measuring AC and DC voltages.
Procedures for measuring AC and DC current.
Steps for measuring electrical resistance.
How to perform a continuity test.
Procedure for testing diodes and semiconductor junctions.
Instructions for measuring capacitance.
How to measure frequency and duty cycle.
Procedure for measuring temperature using the multimeter.
Measuring 4-20mA loop current as a percentage.
Procedure for measuring power (UT71E only).
Overview of data storage, recall, and communication features.
How to store and clear measurement readings.
Procedure to recall previously stored measurement data.
Instructions for exporting data via USB.
Information on customizing default operating configurations.
Guide to entering setup mode and changing options.
Overview of basic maintenance procedures.
Guidelines for general cleaning and care of the meter.
Step-by-step instructions for replacing fuses.
Procedure for replacing the meter's battery.
Details on safety standards and certifications.
Information on the meter's physical dimensions and characteristics.
General technical specifications of the multimeter.
A summary of the multimeter's key features and capabilities.
Summary of fundamental measurement ranges and functions.
Comprehensive accuracy details for various measurements.
Detailed accuracy specifications for DC voltage measurements.
Detailed accuracy specifications for AC voltage measurements.
Detailed accuracy specifications for DC current measurements.
Detailed accuracy specifications for AC current measurements.
Detailed accuracy specifications for resistance measurements.
Specifications for the continuity testing function.
Specifications for the diode testing function.
Detailed accuracy specifications for capacitance measurements.
Detailed accuracy specifications for frequency measurements.
Detailed accuracy specifications for temperature measurements.
Specifications for 4-20mA loop current measurement.
Specifications for power measurement (UT71E only).
To Next Page
