Need help?Do you have a question about the UNI-T UT71D and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Temperature | -40 °C to 1000 °C |
| Diode Test | Yes |
| Continuity Buzzer | Yes |
| Data Hold | Yes |
| Relative Mode | Yes |
| MAX/MIN Mode | Yes |
| USB Interface | No |
| Backlight | Yes |
| Analog Bar Graph | Yes |
| True RMS | Yes |
| Input Impedance for DCV | 10 MΩ |
| Auto Power Off | Yes |
| Power Supply | 9V Battery |
| Display | 6000 Counts |
| DC Current | 600μA/6000μA/60mA/600mA/10A |
| AC Current | 600μA/6000μA/60mA/600mA/10A |
| Resistance | 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ |
| Capacitance | 6nF/60nF/600nF/6μF/60μF/600μF/6mF/60mF |
| Frequency | 10Hz-10MHz |
| Weight | 400 g |
| DC Voltage | 60mV/600mV/6V/60V/600V/1000V ±(0.05%+5) |
General introduction to the manual's content and purpose, highlighting safety and operational information.
Details on checking package contents for completeness and damage upon receiving the meter.
Crucial guidelines and warnings for safe operation of the meter, compliant with IEC61010 standards.
Specific procedures and precautions to prevent electrical shock or damage during meter use.
Explanation of various electrical symbols used on the meter and within this operating manual.
Procedure for powering up the digital multimeter by turning the rotary switch.
Information on the 9V battery type and techniques to conserve battery power.
Description of the automatic power off feature and its configurable time settings.
Details on the backlight's auto-off functionality and how to configure its timer.
How the meter signals a low battery status and the importance of timely replacement.
Identification and description of the meter's main physical components like display and controls.
Explanation of the rotary switch's various measurement function selections.
Description of the meter's functional buttons and their access methods for features.
Cross-reference table showing meter functions and their corresponding display outputs.
How to choose between auto and manual ranging modes for measurements.
Explanation of various symbols and features displayed on the meter's screen.
How the analogue bar graph provides an analogue indication of the measured input.
Functionality for recording and displaying minimum (MIN) and maximum (MAX) input values.
Overview of how to make measurements using the meter's various functions.
Step-by-step guide for accurately measuring AC and DC voltages up to 1000V.
Detailed instructions for safely measuring AC and DC currents using the appropriate terminals.
Procedure for measuring electrical resistance, including precautions for low resistance values.
How to perform continuity tests, including the function of the beeper and resistance threshold.
Method for testing diodes and semiconductor junctions, including expected voltage drop values.
Guide on how to measure capacitance values, including tips for improving accuracy.
Instructions for measuring frequency and duty cycle of signals within specified limits.
Procedure for measuring temperature using the included K-Type probe, with unit conversion.
How to measure 4-20mA loop current and display it as a percentage of the scale.
Instructions specific to power measurement for the UT71E model, including power factor.
Overview of how to use the meter's data storage, retrieval, and computer communication features.
Steps for saving measurement data, setting storage intervals, and clearing stored records.
Procedure for accessing and viewing previously saved measurements stored in the meter's memory.
Information on exporting stored data to a computer via USB using the provided software.
Explanation of how to modify the meter's default operating configuration through setup options.
Guide to entering setup mode and changing various configuration settings like auto-off and backlight.
Overview of basic maintenance procedures, including battery and fuse replacement instructions.
Guidelines for cleaning the meter's case and terminals, and proper storage conditions.
Step-by-step instructions for safely replacing the internal fuses with specified types.
Procedure for safely changing the meter's 9V battery, with precautions against false readings.
Information on safety standards, certifications (CE), and input protection voltage ratings.
Details on the meter's display, operating and storage temperature, and physical dimensions.
Overview of general operating parameters like range mode, polarity, overloading, and battery deficiency.
A concise list summarizing the meter's key features and functionalities.
Summary of basic measurement ranges, bandwidths, and accuracy for key functions.
Detailed accuracy specifications for DC voltage measurements across different ranges.
Detailed accuracy specifications for AC voltage measurements, including bandwidth and True RMS.
Detailed accuracy specifications for DC current measurements, including overload protection.
Detailed accuracy specifications for AC current measurements, including bandwidth and True RMS.
Detailed accuracy specifications for resistance measurements, including short circuit value considerations.
Specifications for continuity testing, including open circuit voltage and buzzer behavior.
Specifications for diode testing, including open circuit voltage and expected junction drop.
Detailed accuracy specifications for capacitance measurements, including circuit test leads effects.
Detailed accuracy specifications for frequency measurements, including input amplitude requirements.
Detailed accuracy specifications for temperature measurements in Celsius and Fahrenheit.
Accuracy specifications for 4-20 mA loop current measurement as a percentage.
Accuracy specifications for power measurement on the UT71E model, including power factor.
To Next Page
