24
Safety connection (*)
Safety
Connection
- Remove the jumper and connect the wires between terminals as indicated
The boiler is equipped with a power cable, boiler
installation requires electric al connection to the
mains power supply. This connection must be
made up to standard, as required the regulations
in force.
The power cable must be replaced by technical
personnel authorised, using original spare parts
only. Failure to comply with the above can jeop-
ardise the safety of the appliance.
The power cable must be replaced by technical
personnel authorised, using original spare parts
only. Failure to comply with the above can jeop-
ardise the safety of the appliance.
Electric power supply connection
See par. 4.5 positioning on the board
(*) Optional
To Next Page
Loading...
