■
CLEANING FUEL FILTER
Gas-powered trucks
CAUTION
The cleaning and replacement of the fuel filter
should be done with the engine shut down. Keep
open ame away from the work place.
Loosen the nut and remove the bowl. Remove the
element and clean.
When reinstalling the bowl, remember to install the
packing. Tighten the nut securely.
Use the drain plug when you want to drain
contamination or water from the lter.
■
CHANGING FUEL FILTER
Diesel-powered trucks
CAUTION
Wipe away any spilt fuel around the fuel filter.
There is a danger of causing a re hazard.
Using a filter wrench, remove the fuel case from the
cover.
Remove the sedimenter sensor from under the filter
case. Install the sedimenter sensor to a new lter case.
Install the new lter case into the cover.
DRAIN PLUG
NUT
BOWL
ELEMENT
PACKING
SEDIMENTER
SENSOR
COVER
FILTER CASE
(The sketch shows the fuel lter of the C240.)
4-38
To Next Page
Loading...
