07DESCRIPTION OF THE TRUCK
20
• Driving is prevented if the platform is down and there is no
operator standing on it.
• Automatic reversing if the driver becomes trapped between
the tiller arm and an obstacle (belly safety switch).
• Lift stop at 1.8 m forks height and folded up gates. To
continue lifting, the gates must be folded down.
• Automatic stop when a fault occurs in the electrical
system.
Trucks equipped with folding platform
If the machine is to be used as a pedestrian truck, the platform
must be folded up manually.
A number of safety functions have been built into the truck to
avoid accidents:
A. Platform folded down without
operator standing on it: The
truck cannot be driven.
B. Platform folded down and
gates up without operator
standing on it: The truck
cannot be driven.
C. Platform folded up and gates
up: The truck cannot be
driven.
D. Platform folded down with
operator standing on it and
gates down: The truck can be
driven at reduced speed.
E. Platform folded up and gates
down: The truck can be
driven at reduced speed.
F. Platform folded down with
operator standing on it and
gates up: The truck can be
driven at normal speed.
Instruction Handbook PLL, PLE, PSL, PSD, PS, PSH, PLP, TS — D002652, B, GBR, ForTranslation
To Next Page
Loading...
