UniCarriers PLP 200 CD - General Information Concerning Stacking 12; Stacking

GENERAL INFORMATION CONCERNING STACKING12
39
Stacking
1) Approach the stack with the load in the lowered position.
2) Lift the load sufficiently high that it clears the stack or shelf
and then drive towards the stack.
3) When the load is in a suitable position, lower it onto the
stack.
4) Lower the forks so that they release the load/pallet, and
check that no-one is behind the truck before reversing
away from the stack.
5) Lower the forks into their transport positions.
6) When fetching a load from a stack, carry out these
movements in reverse order.
Instruction Handbook PLL, PLE, PSL, PSD, PS, PSH, PLP, TS — D002652, B, GBR, ForTranslation