UniCarriers PLP 200 CD - Battery Management; Battery Specifications; Battery Charging and Changing

08BATTERY
22
Specifications
Specifications PLL, PSD, PSL, PLE, PS, PSH
Truck model Battery voltage
and capacity
(V/Ah)
Capacity
(kWh)
Weight
min/max (kg)
PLL 24/160-230 3,8-5,5 140/215
PLE 24/150 3,6 140/190
PSD/PSL/PS 24/160-230 3,8-5,5 140/215
PSH 24/240 5,8 240/300
PSH 24/345 6,5 330/360
Table 3. Battery as standard
Specifications PLP
Truck model Battery voltage
and capacity
(V/Ah)
Capacity
(kWh)
Weight
min/max (kg)
PLP 200 24/220-400 5,3-9,6 250/370
PLP 250 24/330-600 7,9-14,4 350/500
Table 4. Battery as standard
Specifications TS
Truck model Battery voltage
and capacity
(V/Ah)
Capacity
(kWh)
Weight
min/max (kg)
TS 24/240 5,8 215/290
TS 24/270 6,5 250/290
Table 5. Battery as standard
Battery changing
Battery servicing may only be performed by specially trained
personnel. The battery may, however, be charged by other
personnel on the condition that a battery connector is used to
connect the battery to the charging unit. The battery is charged
in accordance with recommendations from the battery
manufacturer, using a charger adapted for the battery. The truck
is intended to be used with lead/acid batteries. Only fully
automatic charging systems should be used.
Follow local laws and safety regulations when charging the
battery. The area where batteries are charged should be
marked out and have proper ventilation. An eyewash station,
cleaning equipment, fire extinguisher and safety glasses must
be available.
WARNING!
Specific gravity checks should only be performed by
an authorised service technician.
Instruction Handbook PLL, PLE, PSL, PSD, PS, PSH, PLP, TS — D002652, B, GBR, ForTranslation