ENDAT-3857 USERS MANUAL
UNICORN COMPUTER CORP.
28
All of the above CMOS BIOS items require board knowledge on PC/AT system
architecture. Incorrect setup could cause system malfunctions.
Navigating Setup Menus and Fields
Navigation (moving your cursor around, selecting items, and changing them) is
easy in Setup.
Following setting belongs to standard function setting:
Main Menu
The Standard Setup is used for the basic hardware system configuration. The main
function is for Data/Time and Hard Disk Drive settings.
˙System Date (mm:dd:yy)
˙System Time (hh:mm:ss)
Allows you to set the system date and time
(Use the TAB and BACKTAB (SHIFT + TAB) keys.)
˙System Information
This submenu provides information about the system BIOS, CPU, and memory, as
shown in Figure
The following table describes the settings associated with the Boot Features.
Quick Boot
Enables OEM Logo
Diagnostic Splash Screen
Enables graphical POST, including animation,
sound, icons, advertisements, and other multimedia
objects that may be configured by the OEM.
Diagnostic Summary Screen
Enables the diagnostic summary screen.
UEFI Boot
Enables the Unified Extensible Firmware Interface.
Legacy Boot
Enable this option to bypass some drivers
and speed up POST.
To Next Page
Loading...
Need help?
General