How to fix Uniden Bearcat Trunktracker IV Scanner that won't work?
If the Uniden Scanner won't work, verify the AC adapter connections at both ends. Ensure the wall switch for the outlet is turned on, as it might control the outlet. If the issue persists, try plugging the AC adapter into a different wall outlet.
What to do if Uniden Scanner scan won't stop?
If you are experiencing scan not stopping issue with your Uniden Scanner, you can try the following: 1. Adjust the squelch threshold. 2. Check the antenna connection. 3. Check to see if many of the channels are Locked Out. If so, the scanner has less chance of finding an active channel. 4. Review each channels frequency to see if it is still stored in Memory and is correct. 5. It's possible that none of the programmed frequencies are currently active.
How to improve Uniden Scanner reception?
To troubleshoot improper reception on your Uniden Scanner: 1. Check the antenna connection. 2. Move the scanner to a different location. 3. If you are in a remote area, you might need a multi-band antenna. Consult your dealer or a local electronics store.
Why Weather Scan won't work on Uniden Scanner?
If the Uniden Scanner weather scan won't work, you can try to: 1. Adjust the squelch threshold. 2. Check the antenna.
Why does my Uniden Bearcat Trunktracker IV have scratchy or robotic sound?
If you are hearing scratchy or robotic sounds during communications on your Uniden scanner, try moving to a location where the signal strength is stronger. It's also possible that the transmissions being sent have low modulation accuracy.
What to do if Uniden Bearcat Trunktracker IV will not acquire data channel?
If your Uniden scanner will not acquire data channel, try the following: 1. Adjust the squelch for Trunking mode. 2. Check your frequency list to make sure you have the frequency used for the data channel.
What to do if Uniden Bearcat Trunktracker IV scan won't start?
If the Uniden Scanner scan won't start, try these steps: 1. Press the SCAN key again. 2. Adjust the squelch threshold. 3. Check to see if all channels are Locked Out.
Why digital communication is not heard on Uniden Scanner?
If you're not hearing digital communication on your Uniden Scanner, verify the accuracy of the frequencies for the P-25 system you're monitoring. Also, you might be in a dead spot; try checking other locations in the area.
How to fix Uniden Bearcat Trunktracker IV that won't track?
If your Uniden Scanner won't track, change to a Type 1 Scanner setup.
What to do if Uniden Scanner missing replies to conversations?
If you are missing replies to conversations on your Uniden Scanner, you can: 1. Change to a Type 1 scanner setup. 2. Try another Preset Fleet Map or Program your own Fleet Map. 3. Check to see that all of the systems frequencies have been entered.
General| Trunking Capability | Yes |
|---|---|
| Scan Rate | 100 channels per second |
| Priority Channels | Yes |
| GPS Compatibility | Yes |
| Memory Backup | Yes |
| Type | Handheld Scanner |
| Display | LCD |
| Power Source | AC adapter |
| Bands | VHF, UHF |
| Frequency Steps | 5, 6.25, 10, 12.5 kHz |
| Modes | AM, FM |
Legal considerations for operating a scanning receiver.
Guidance on how to effectively use the owner's manual.
Background on conventional and trunked scanning.
Explanation of simplex and repeater operation in conventional systems.
How trunking systems manage frequencies efficiently.
Details on Motorola trunking system types (Type I, II, IIi, Astro).
Explanation of EDACS trunking, LCN, and AFS hierarchy.
Information on Logic Trunked Radio (LTR) systems.
How the scanner's memory is organized into banks and channels.
Contacting Uniden and other sources for frequency data.
Identification of controls, connectors, and display icons.
List of items included with the BC796D scanner.
Guide to connecting and mounting antennas.
Methods for mounting and connecting power for vehicle/desktop.
Connecting external speakers or earphones for listening.
Guidelines for safe listening with earphones to prevent hearing damage.
Instructions for connecting clone and tape recorder cables.
Steps to power on the scanner and adjust the squelch control.
Navigating the scanner's menu for various settings.
Manually selecting channels and locking/unlocking banks/channels.
Using Priority Scan and Priority Plus Scan for important channels.
Adjusting display dimmer, information display, and key beep.
Enabling/disabling APCO 25 card, setting squelch modes, and muting.
Features for scanning and monitoring trunked systems.
How to search for active talkgroups or scan stored ones.
Locking out unwanted talkgroups or entire EDACS agencies/fleets.
Holding on an active or selected talkgroup for monitoring.
Starting searches, holding, setting ranges, and searching trunk systems.
Configuring tones, attenuating signals, and setting search delays.
Utilizing preprogrammed service searches and skipping unwanted frequencies.
Searching for NOAA broadcasts and configuring SAME weather alerts.
Testing the functionality and sounds of weather alert notifications.
Configuring banks and assigning names for easier identification.
Deleting, transferring, entering tags, and programming best practices.
Programming channels, setting delay, tones, beep alert, attenuator.
Changing frequency steps, modulation, and setting priority channels.
Introduction to APCO 25, Motorola, EDACS, and LTR trunking systems.
Programming Motorola Type 2/Digital and Type I/IIi Hybrid systems.
Programming EDACS Wide, Narrow, and SCAT systems.
Steps for programming LTR systems and setting trunking delay.
Setting priority talkgroups, using I-Call, and Multi-Track operation.
Programming Motorola control channels and Type 2/Digital systems.
Programming Type I or IIi Hybrid systems using fleet maps.
Options for handling Motorola status bits and end code detection.
Setting EDACS emergency alerts and decimal mode.
Adjusting sound quality for optimal APCO 25 digital audio.
Steps for programming LTR trunking systems and talkgroups.
Storing, finding, deleting talkgroup IDs, and adding tags.
Connecting to PC for control and cloning settings to another scanner.
Proper use, placement, cleaning, and handling of birdies.
Information on handling repairs and initial troubleshooting steps.
Solutions for scanner not working, poor reception, and scan issues.
Resolving issues with trunk tracking, missing replies, and no audio.
Specifications for channels, frequency range, power, size, and weight.
Definitions of terms like Alpha Tag, CTCSS, DCS, PC Control.
Explanation of Motorola status bits and talkgroup functionality.
Pre-programmed and custom fleet map configurations for Type I systems.
Table of size codes and their limitations for fleet map creation.
List of NWR SAME event codes and their corresponding LCD display text.
List of reverse frequencies used in trunked systems by band plan.
Visual representation of service search and chain search menu navigation.
Details of Uniden's limited warranty, coverage, and exclusions.
To Next Page